HP 234664-002 - ProLiant - ML330T02 Руководство по устранению неполадок - Страница 15

Просмотреть онлайн или скачать pdf Руководство по устранению неполадок для Настольный компьютер HP 234664-002 - ProLiant - ML330T02. HP 234664-002 - ProLiant - ML330T02 18 страниц. Visualization and acceleration in hp proliant servers
Также для HP 234664-002 - ProLiant - ML330T02: Часто задаваемые вопросы (4 страниц), Руководство по внедрению (35 страниц), Техническая белая книга (12 страниц), Обновление прошивки (9 страниц), Обзор (20 страниц), Руководство по внедрению (26 страниц), Вводное пособие (22 страниц), Руководство по внедрению (11 страниц), Руководство по установке (2 страниц), Руководство по конфигурации (2 страниц), Вводное пособие (19 страниц), Руководство по обновлению (9 страниц), Руководство по обновлению (16 страниц), Вводное пособие (10 страниц), Руководство по установке (15 страниц), Краткое описание технологии (9 страниц)

For more information on how to deploy firmware updates remotely, refer to the following URL:

http://h18004.www1.hp.com/products/servers/management/im/index.html

Customer Advisory

c00683436, Online ROM Flash Tool Available For Updating Firmware On ProLiant

Servers And Options, is available at:

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?locale=en_US&objectID=c00683436

Updating Firmware Using the OFFLINE ROM Flash Method

The Offline ROM Flash, as its name implies, is performed when the server is taken down for regular

maintenance. Although the results will be the same, the Offline ROM Flash does not provide the same benefits

of the new Online ROM Flash method. In addition, when upgrading remotely, the server administrator can

only update one server at a time.

There are two methods of performing an Offline ROM Flash. The firmware can be updated using a ROMPaq

Diskette or using the ROM Update Utility.

A ROMPaq is a floppy-disk based method of upgrade. The firmware is downloaded onto a floppy diskette

and then the system is booted to the floppy drive.

The ROM Update Utility is located on the Firmware Maintenance CD, or can be downloaded to a USB Drive

Key using the HP Drive Key Boot Utility.

Note: Hard Drive components can only be updated using the Offline method.

The HP Drive Key Boot Utility

The HP Drive Key Boot Utility can format an HP Drive Key so that it can be used as a bootable device. The

utility also provides the ability to load the ROM Update Utility on an HP Drive Key. After the ROM Update

Utility has been installed, the Offline ROM Flash Smart Components can be downloaded to the drive key from

the following URL and deployed using the ROM Update Utility:

http://h18023.www1.hp.com/support/files/server/us/smartstartGP.html

System ROM support is required for the HP Drive Key Utility. To determine server support, refer to the

following URL:

http://h18004.www1.hp.com/products/servers/platforms/usb-support.html

For additional information on the HP Drive Key Boot Utility, refer to the following URL:

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00218060/c00218060.pdf