HP 6930p - EliteBook - Core 2 Duo 2.8 GHz Руководство по установке и настройке - Страница 10

Просмотреть онлайн или скачать pdf Руководство по установке и настройке для Настольный компьютер HP 6930p - EliteBook - Core 2 Duo 2.8 GHz. HP 6930p - EliteBook - Core 2 Duo 2.8 GHz 18 страниц. Notebook tour
Также для HP 6930p - EliteBook - Core 2 Duo 2.8 GHz: Технические характеристики (45 страниц), Руководство по эксплуатации (16 страниц), Руководство пользователя (15 страниц), Обновление программного обеспечения (12 страниц), Руководство по настройке (15 страниц), Руководство пользователя (17 страниц), Руководство по работе с сетью (16 страниц), Руководство пользователя (25 страниц), Руководство пользователя (27 страниц), Обзор (16 страниц), Руководство по установке программного обеспечения (8 страниц), Руководство пользователя (14 страниц), Руководство пользователя (41 страниц), Технические характеристики (48 страниц), Руководство пользователя (32 страниц), Руководство пользователя (27 страниц)

Печатать страницу
HP 6930p - EliteBook - Core 2 Duo 2.8 GHz Руководство по установке и настройке
Limited remote system management includes:
System status
•
•
Managing of wireless profiles
•
Hardware inventory
Event logging
•
Remote system reset
•
Changing of network settings
•
•
Addition of new users and passwords
•
Updating ME firmware
WebGUI support is enabled by default for SMB Setup and Configured systems.
WebGUI support for Enterprise Setup and Configured systems is determined by the Setup and
Configuration Server.
Connecting with the Intel AMT WebGUI - SMB Example:
1) Power on an AMT system that has completed AMT Setup and Configuration.
2) Execute a web browser from a separate system – a Management PC that is also on the same
subnet as the AMT PC.
3) Connect to the IP address specified in the MEBx and port of the AMT system.
a. By default the port is 16992.
b. If DHCP was used, then use the Fully Qualified Domain Name (FQDN) for the ME.
The FQDN is the combination of the hostname and domain.
Example A:
Example B:
4) The Management PC makes a TCP connection to the AMT system and accesses the top level
AMT embedded webpage within the Management Engine of the AMT system.
5) Enter username and password. The default username is "admin" and the password is the one
set during AMT Setup in the MEBx.
6) Review system information and/or make any necessary changes.
Important Note: The AMT Admin password can be changed for the remote system in the
WebGUI.
Changing the password in the WebGUI or a remote console will result in two passwords. The
new password, known as the AMT Admin password, will only work remotely with the WebGUI or
remote console. The local MEBx password used to access the MEBx locally will not be changed!
The user will have to keep track of both the AMT Admin password and local MEBx password to
be able to access the AMT system remotely or the system MEBx locally.
When the MEBx password is initially set in AMT Setup, it serves as both the local and remote
password. They are in sync. If the remote password is changed, then the passwords are out of
sync.
The AMT Admin password must also follow the criteria defined in the Password Guideline section
for a strong password.
7) Exit.
http://192.168.0.1:16992
http://intelamt.intel.com:16992
(from Steps 18 and 19h)
10