360 YIELD CENTER 360 SOILSCAN Инструкции по настройке - Страница 9
Просмотреть онлайн или скачать pdf Инструкции по настройке для Сельскохозяйственное оборудование 360 YIELD CENTER 360 SOILSCAN. 360 YIELD CENTER 360 SOILSCAN 12 страниц.
Печатать страницу+
360 SOILSCAN ADDITIONAL PRODUCT
INFORMATION AND INSTRUCTIONS
Machine Measurements: 21L x 12W x 19H
Weight: 17.4 kg
Lifting/carrying: When picking up 360 SOILSCAN™, use the handle on the back of the machine.
Safety: Please read and follow all instructions prior to operating equipment. Safety may be
impaired if equipment is used in a manner not specified by the manufacturer.
Wear chemical splash safety goggles, chemical-resistant gloves, and a chemical-resistant apron
when handling standard solution.
Noise level: Noise levels emitted from the equipment are under 70dBA.
+
USB PORT
The USB port is intended only for connection to signal circuits from SELV sources of supply such
as certified information technology equipment (i.e., computer, touch pads, cell phones, etc.).
The supply connector is intended only for connection to the output of the brick power supply
originally provided with the unit or to an accessory outlet of a vehicle through the vehicle supply
cord provided with the unit. These devices provide required protection for the equipment for
CE compliance and cannot be substituted by other, similar devices. If the supply cord or power
supply is damaged, contact the manufacturer for replacement.
+
MAINTENANCE/SERVICE
Sensor Tip Test: See attached "360 SOILSCAN Sensor Testing".
Proper Storage: See attached "Storage Guidelines for 360 SOILSCAN".
Power supply: Only use 360 Yield Center supplied parts for power supply. Use of unapproved
parts may result in damage to the components.
Only use 360 Yield Center parts for servicing unit. Use of unapproved parts may result in
damage to components. Regularly inspect all cords and cables. Do not use if any cable or cord is
damaged. Replace any damaged cables and cords with only manufactured specified parts.
Only operate the unit in a location where ready access to the supply connection point for
disconnection is readily accessible.
Replace fuse only as marked on fuseholder. Use only Type ABC fast acting fuses rated 5A,
125Vdc. Use of higher value fuses may result in fire hazards.
End of life disposal of equipment: Do not place in garbage bin. Take equipment to your nearest
electronics recycler for proper disposal.
360 SOILSCAN™
SETUP INSTRUCTIONS
360YIELDCENTER.COM