ALLO Boss2 Руководство - Страница 6

Просмотреть онлайн или скачать pdf Руководство для Проигрыватель ALLO Boss2. ALLO Boss2 7 страниц.

Software Boss2 Driver and Configuration :

Boss2 dac Driver is included on RPI 5.4.77 kernel onwards. In some players

(Moode and more) Boss2 is configurable through GUI.

Manually configuring Boss2-DAC .

Check for allo-boss2-dac dtbo

Goto /boot/overlays/

Check for allo-boss2-dac-audio.dtbo file.

If Present edit the /boot/config.txt file and add/replace dtoverlay

with dtoverlay=allo-boss2-dac-audio

Front panel Display/OLED configuration:

Boss2 player Front Panel Display (OLED) application is based on Python and

need to install on respective OS. Installation steps refer below link.

http://3.230.113.73:9011/Allocom/Boss2/Boss2_oled_install_steps

Boss2 Player User settings can set through Front panel buttons or IR Remote

Front Panel Buttons: Left, OK/M, Right, Up (+), Down (-)

Buttons:

UP/Down Buttons – Volume Control

LEFT/RIGHT Buttons – MENU navigation

CENTRE or OK Button – By default MUTE/UNMUTE, selection button on MENU

NOTE: In IR separate button for MUTE

MENU:

– system information

SYSINFO

HV-EN - High Voltage Enable/Disable – RMS (1.7 or 2.0 Volt) voltage setting.

ON – 2.0 Volt

OFF – 1.7 Volt

FILTER – Filter selection

PHCOMP – phase-compensation Enable/Disable

HP-FIL – High Pass Filter Enable/Disable