ABB AC500 Series Руководство по установке и настройке - Страница 11
Просмотреть онлайн или скачать pdf Руководство по установке и настройке для Промышленное оборудование ABB AC500 Series. ABB AC500 Series 20 страниц. Scalable plc for individual automation, connection of a dcf77 radio clock to an ac500 via ascii protocol
Также для ABB AC500 Series: Пример применения (8 страниц), Руководство (18 страниц)
Печатать страницу
Fig. 3: Wiring of training case
1.3.2 System assembly, construction and connection
You can mount AC500 PLC either to DIN rail or to a metal plate. Here, we recommend to mount
on DIN rail.
1.
2.
3.
4.
2021/05/14
For the example projects, not all input switches and none of the potentiometers
included in training case are necessary.
You will need switch I1 for the example project for central I/O expansion.
You will need switch I5 for the example project for remote I/O expansion.
NOTICE!
Avoidance of electrostatic charging
PLC devices and equipment is sensitive to electrostatic discharge, which can
cause internal damage and affect normal operation. Observe the following rules
when handling the system:
–
Touch a grounded object to discharge potential static.
–
Wear an approved grounding wrist strap.
–
Do not touch connectors or pins on component boards.
–
Do not touch circuit components inside the equipment.
–
If available, use a static-safe workstation.
–
When not in use, store the equipment in appropriate static-safe packaging.
Snap the terminal base onto DIN rail.
Snap the additional terminal units for I/O modules onto DIN rail.
Make the sensor/actuator wire connections according to the dedicated electronic module
you want to use. Provide external process power supply as required.
If required, make the fieldbus connections according to the dedicated master communica-
tion module you want to use.
3ADR010584, 2, en_US
Hardware AC500 V3 > System assembly, construction and connection
Getting started with AC500 V3 products
11