Alloy ESM-24T02M Руководство по быстрой установке - Страница 3

Просмотреть онлайн или скачать pdf Руководство по быстрой установке для Переключатель Alloy ESM-24T02M. Alloy ESM-24T02M 5 страниц. Etherguard managed switch

Печатать страницу

LED indicators information

LED
Color
Power
Green Power is applied to this device
DIAG
Green Self diagnostic successful
FAN1
Red
Cooling
Red
FAN2
Fans
LINK/ACT
Green 10Mbps Ethernet connection speed
(1 ~24 port)
Green 100Mbps Fast Ethernet connection
100M
(1 ~24 port)
Off
10/100/1000Mbps Copper Gigabit Port (Optional Module)
Top LED
Orange 100Mbps Fast Ethernet connection
Middle LED
Green 10Mbps Ethernet connection.
Bottom LED Green N/A
Top+Middle
Orange
LEDs
+ Green

Initial set up for management

There are two ways to perform the initial setup on the Switch; one is "Out-of-Band
Configuration" (connect your PC's serial port to the Switch's console port with the included
RS-232 serial cable and run a terminal communication program) and the other is "In-Band
Configuration" (network a PC to the Switch and run a web browser session or telnet). The
sections below show the instructions on how to perform both operations.
Out-of-Band Terminal Mode Configuration
If you are using Microsoft Windows, boot up the computer, go to "Start", "Programs",
"Accessories", "Communications", and open "HyperTerminal". After that follow the
instructions below to setup a new terminal connection for the Switch. If you are using other
communication software applications, please select the correct COM port and setup the
connection properties according to step 3 below.
1.
Type in a name for the connection (e.g. SNMP Switch), select an icon for the
connection, and click "OK".
2.
Select the COM port that you are using for this connection and click "OK".
Solid
Left cooling fan failed
Right cooling fan failed
speed
10Mbps connection speed
speed (with Middle LED off)
(with Top LED off)
1000Mbps Gigabit connection speed
3 of 5
Status
Blinking
N/A
Performing self diagnostic
(after Power On)
N/A
N/A
TX/RX activity or Collision
N/A
N/A
N/A
N/A
TX/RX activity or collision
N/A