Miller Maxstar 161 S Руководство пользователя - Страница 29
Просмотреть онлайн или скачать pdf Руководство пользователя для Сварочные принадлежности Miller Maxstar 161 S. Miller Maxstar 161 S 44 страницы. Arc welding power source with auto-line
Печатать страницу
6-7. Accessing Control Panel Menu: Lift-Arc TIG (STH And STL Models Only)
1
USER
REMOTE STD
PPS
.
A complete Parts List is available at www.MillerWelds.com
2
Trigger Mode Selection:
[REMOTE STD] Remote Standard
Typically used with a remote foot or hand control. REMOTE STD requires
a maintained contact closure to enable weld output. Amperage can be con-
trolled with a remote potentiometer, or it can be set at the control panel.
[OUTPUT ON] Output on (Lift only)
[PPS] Pulse Control: (STH Model Only)
Reduces heat input to minimize distortion and increase travel speed. Set
PPS (pulse per second). The range is OFF−150 PPS. Background Am-
perage and Peak Amperage are not adjustable. Background Amperage
OFF
equals 25% of Peak Amperage. Peak Amperage Time equals 40%.
1
While in the Lift-Arc process, press
and hold Menu button for approxim-
ately two seconds to access Ma-
chine Configuration menus. Use
Menu button to cycle through pa-
rameters that can be set.
2
3
Rotate Encoder to adjust parame-
ter setting.
3
Menu Button
Parameter Display
Encoder
OM-275099 Page 25