Aquasana AQ-SFRO-BN Руководство пользователя - Страница 5
Просмотреть онлайн или скачать pdf Руководство пользователя для Системы фильтрации воды Aquasana AQ-SFRO-BN. Aquasana AQ-SFRO-BN 13 страниц. Under sink water filter smartflow reverse osmosis
6
INSTALLATION STEPS
2
6
Sanitize and Install Water Tank
A. Using the included eye dropper, add 3ml bleach into the top of the
water tank.
NOTE: Sanitation step will be completed during the
pressure test and flush step of the installation.
B. From the accessories box, find the plumber's tape roll and water
tank valve.
C. Wrap the plumber's tape around the stainless steel connector
4-5 times.
D. Screw the water tank valve onto the plumber's tape wrapped
stainless steel connector.
E. Hand tighten water tank valve until secure (be sure not to
cross-thread or over-tighten). After you have secured with hand
tightening, tighten with wrench a quarter turn to ensure secure fit.
Turn to the right
7
Connect Water Tank to Manifold
A. Open water tank valve. Valve should be pointing towards
the valve port.
CLOSED
OPEN
B. Insert one end of the yellow tubing into the
water tank valve.
C. Place water tank on the tank stand in an area
that is near the system manifold.
D. Connect water tank to the system manifold. Do so by connecting the
other end of the yellow tubing to the yellow inlet port on the
backside of the system manifold, labeled, 'tank'.
INSTALLATION STEPS
7