aquatherm AT800 Руководство по установке - Страница 6
Просмотреть онлайн или скачать pdf Руководство по установке для Тепловой насос aquatherm AT800. aquatherm AT800 16 страниц. Swimming pool & spa heat pumps
“black cabinet” with analog controls series only
Также для aquatherm AT800: Руководство по эксплуатации (12 страниц), Руководство по установке (8 страниц)
Печатать страницуPlumbing & Water Connections for Pool/Spa Combinations
For a connected pool and spa, where the spa has a spill over type waterfall into the pool. Where
one pump and one heater is used for either the pool or the spa. If the water pump exceeds 1.5
H.P. then install either of the optional bypasses as shown on page 5.
SPA
POOL
SEE CHLORINATOR LOOP & CHECK
VALVE REQUIREMENT ON PAGE 5.
Plumbing & Water Connections for Separate Pool & Spa
For a separate pool and spa not con-
nected, and does not have a spill-
over. Where the pool and the spa
have separate pump & filter systems
but using the same heater. If the water
pump exceeds 1.5 H.P. then install
either of the optional bypasses as
shown on page 5.
SEE CHLORINATOR LOOP & CHECK
VALVE REQUIREMENT ON PAGE 5.
Page 6