Aquatic SWA6+ Руководство по эксплуатации и установке - Страница 11

Просмотреть онлайн или скачать pdf Руководство по эксплуатации и установке для Сабвуфер Aquatic SWA6+. Aquatic SWA6+ 18 страниц. Combined bluetooth stereo subwoofer with full range speaker outputs

Печатать страницу

Listening to Devices

3.2.2 Listening via Bluetooth Audio Device

1. Bluetooth Audio mode will be activated once a Bluetooth Audio device is paired in any

mode. Use MODE to change to the Bluetooth Audio mode to listen to music.

2. Play the song from device and the sound will play through the SWA6+.

3. Press PLAY/PAUSE to play/pause the song.

4. Press FAST REWIND/FORWARD buttons to play previous/next song file.

4. Press and hold FAST REWIND/FORWARD buttons to fast forward / fast rewind the song

file.

5. Previous/next track and volume up/down can be controlled directly from your Bluetooth

Audio device or directly from the SWA6+ remote control.

3.2.3 Bluetooth Multi-link

A second Bluetooth Audio device can pair to the SWA6+ even when music is playing from the first

Bluetooth Audio device.

Once paired, playing music from device 2 will override device 1 and the SWA6+ will begin playing

music from device 2.

Should you wish to play music from device 1 again, wait 10 seconds and press play on device 1.

This process can be repeated between device 1 and device 2 indefinitely while both devices are

paired.

3.3 Listening via Auxiliary Input

1.Connect your MP3 device to the stereo RCA inputs.

2. Press MODE on the remote control to select 'AUX' mode.

If using a single RCA 'sub' output then an RCA Y adaptor must be used to provide input to both red and white

RCA inputs on the subwoofer.

Connecting and playing device via Bluetooth will overide Auxiliary mode.

3.4 Adjust Volume Level

1. Press VOLUME UP once to increase the volume.

2. Press VOLUME DOWN once to reduce the volume.

3. Press and hold either VOLUME UP or VOLUME DOWN to increase or decrease audio

volume continuously.

3.5 Automatic Standby Mode

Automatic Standby mode will engage when the SWA6+ does not see any input from either the

RCA's or Bluetooth.

Once a signal is detected the unit will switch on again.

www.aquaticav.com

Combined Stereo Subwoofer SWA6+