Olympus CKX41 Руководство по ремонту - Страница 29

Просмотреть онлайн или скачать pdf Руководство по ремонту для Микроскоп Olympus CKX41. Olympus CKX41 43 страницы. Reflected fluorescence system
Также для Olympus CKX41: Обзор (7 страниц), Брошюра и технические характеристики (4 страниц), Руководство по эксплуатации (36 страниц)

Печатать страницу

CKX31/CKX41

(3) Optical axis (CKX41)

<Fig.2>

1) Remove the cover-L and cover-R.

Screw: 3PUTB2X4SB 3pcs. each (*1)

2) Remove the cover.

Screw: CUTB3X10SA 2pcs. (*2)

Adjustment (B)

Adjustment (A)

Adjustment (A) : Loosen the screws(*3) and adjust the revolving axis by moving the right sleeve.

Adjustment (B ) : Loosen the screws(*4) and adjust the left /right optical axis by moving the left

Adjustment ( C) : Loosen the screws(*5) and adjust the absolute optical axis in the right sleeve

(4) Parfocality <CKX41>

*In the same manner as CKX31, adjust the paforcality by inserting washer under the lens frame-1.

(For adjustment procedure, refer to D-12.)

Insert the jigs in the right sleeve and check

the parfocality.

Jigs:

1) Focusing telescope (FT-36 or U-FT)

2) Standard eyepiece (KN0048; Adapter-1)

3) Standard objective (KN0041)

D. REPAIR PROCEDURE

Screw: CUK3X6SB 2pcs

sleeve. (the right sleeve is taken as a standard)

Screw: CUK3X6SB 2pcs. (*4)

by moving the position of binocular unit.

Screw: CUKK3X6SA 4pcs. (*5)

Cover-L

Cover-R

<Fig.2>

Adjustment (C)

(*3)

(Positions of

screw holes)

After checking it in the right sleeve, turn the

helioid to focus on the specimen in KN0041,

then loosen the screws(*1) ,only move the

scale ring and fix it at the position where

scale "0" is aligned to the index.

Note: When using the screw(*2) for fixing eyepiece;

mount the diopter ring with (A) and (B) screw

hole positions aligned without the above

adjustment.

D-2

Cover

Diopter ring (A)

Helicoid ass'y (B)