Olympus PT-055 Руководство по эксплуатации - Страница 25

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Аксессуары для фотоаппаратов Olympus PT-055. Olympus PT-055 32 страницы.

How to Apply Grease to the O-ring

Apply the exclusive

lubricant to each

O-ring.

Spread the lubricant

all over the O-ring.

Check that the O-ring

is free of scratches or

unevenness.

Apply lubricant on the

O-ring contact

surface.

CAUTION:

• Always perform maintenance of the waterproof function even when the

Case has been opened every shooting. Neglecting this maintenance may

cause water leakage.

• When the Case is not to be used for a long time, remove the O-ring from

the groove to prevent deformation of the O-ring, apply a thin coat of silicone

grease, and store it in a clean plastic bag or the like.

Make sure that your fingers and the

O-ring are free of dirt, and squeeze about

5 mm of lubricant onto a finger. (5 mm is

the most appropriate amount.)

Apply the lubricant with three fingers and

spread it over the ring. Be careful not to

use force as this may stretch the O-ring.

After spreading the lubricant, check

visually and by touch that the O-ring is

not scratched and that its surface is flat.

If it is damaged in any way, be sure to

replace it with a brand-new O-ring.

Use the lubricant remaining on the

fingers to clean and lubricate the case's

contact surface.

EN 25