Ayra 9000-0019-2042 Руководство пользователя - Страница 10
Просмотреть онлайн или скачать pdf Руководство пользователя для DJ оборудование Ayra 9000-0019-2042. Ayra 9000-0019-2042 20 страниц. Dmx cob led light kit with power outputs
Печатать страницу
The ComPar KIT series comes with a practical tripod light stand. Extract the feet of the stands until they are
fully extended. Pull the distance tube out until you reach the appropriate installation height and tighten the
knob. Use the included safety pin to ensure that the stand will not slide down. Place the ComPar KIT bar on
the stand. To activate the unit, connect the included power supply to the unit and a suitable 230V, 50Hz
power outlet. The unit will activate directly after it is plugged in to a wall outlet or other power source.
The status of the fixture is shown on the display. Certain values determine the current status and will change
when you push buttons on the control panel. The buttons each have their own function, for easy navigation in
the control panel.
Display codes:
display
Mode
ADDR
DMX address setting
CHND
Channel mode
SLND
Master/Slave mode
SHND
Show mode
SOUN
Sound mode
SENS
Sound sense
BLND
Blackout mode
LED
Display on/off
DISP
Display inversion
TEST
Test mode
Hour
Using time of light
Any information and illustrations shown in this user manual are subject to change without further notice.
User manual version: 1.0
Setting up the unit
Function
A001-A512
1-channel mode
3-channel mode
7-channel mode
12-channel mode
16-channel mode
Slave 1-2 or master operating
mode
Show 1 - Show 8 + AUTO
Sound on/off
Sound sensitivity 0-100
LED mode, YES – NO
LED YES – NO
Display Inversion, Idsp-dspI
Self test
Fixture hours, 0 ~ 9999
Creation date + author initials: 22-04-2015 RV Revision date + author initials: -
Description
Set the DMX start address by
choosing a value between 1 and
512.
Select the DMX channel mode,
which determines how many
channels the unit will fill on your
DMX controller. More channels =
more specific functionality
NOTE: Only possible by connecting
two ComPar KIT 3 units with each
other by 3p XLR cable.
Set the unit to Slave 1 or 2. In music
mode, slave 2 will switch between
mirrored and synced operation
mode. Slave 1 is standard synced
mode.
Select any internal automatic show
for stand-alone applications
When selecting the AUTO mode, you
can also select a preferred speed to
run the programs to.
Activate or deactivate the internal
microphone and the music-controlled
mode
Select the sensitivity of the internal
microphone, for the sound-activated
mode
Activates or deactivates the beam
output for the LED projectors
Shuts down the display when not
used after 30 seconds
Inverts the display, when the unit is
used upside-down as a large floor
spotlight with floor stands. This
makes it easier to read certain
display statuses.
Self-test program, projects all
colours separately. This makes it
possible to check if there are
defective LED modules.
Displays the run time of the fixture.
Used by rental companies to