AccuStrata FLUOROTEK 200 Руководство по эксплуатации - Страница 7
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Измерительные приборы AccuStrata FLUOROTEK 200. AccuStrata FLUOROTEK 200 17 страниц. Handheld fluorometer
Также для AccuStrata FLUOROTEK 200: Краткое руководство по эксплуатации (2 страниц)
Печатать страницуThe top of the
T
S
displays the number of minutes at which the measurement was
EST
CREEN
taken after the test was initiated. Once the measurement is complete, the
R
S
is
ESULTS
CREEN
displayed. The
R
S
displays the time of the reading and the measured values,
ESULTS
CREEN
which is:
= −
After the first read, a 10 minute timer is started. This is the average amount of aging required for
specific bacteria detection reagents to sufficiently fluoresce. Once the 10 minute time is
reached, a second measurement is automatically taken. While the timer is counting, the user
can save the first read to memory using the Save button or cancel the read by using the Return
button. To the right of the timer is the data save location. Each light channel has a set of
memory slots that are numbered. When a new reading is saved to the system, the value is
assigned to a memory slot that has an integer value associated with it. This integer value that
represents the data slot that the measured value will be stored in is displayed to the right of the
timer value.This number also corresponds to the table position of downloaded values on the
software application. The values can also be reviewed on the system itself.
6 |
P a g e
AccuStrata Fluorotek 200 User's Manual