AccuTemp STEAM'N'HOLD Руководство по установке и эксплуатации - Страница 7
Просмотреть онлайн или скачать pdf Руководство по установке и эксплуатации для Торговое пищевое оборудование AccuTemp STEAM'N'HOLD. AccuTemp STEAM'N'HOLD 15 страниц. Vacoom steamer
Печатать страницуDOUBLE STAND INSTALLATION WITH
ADJUSTABLE FEET
WARNING!
When using a stand that is equipped with casters,
the floor surface must be level and flat. Failure to
do so can result in a "tipping" hazard that could
result in serious injury.
The AccuTemp SNH20 double stand is equipped
with adjustable height feet and the AccuTemp
SNH21 double stand is equipped with non-
adjustable height casters. Both stands can
accommodate either two S6 models or two S3
models or a single S3 model on the top and a
single S6 model on the bottom.
Before mounting a appliance on the SNH21
stand, engage the brakes on the two front locking
casters, pressing on the "ON" handle of the brake
mechanism. To mount the appliance, carefully lift
and place it on the bottom horizontal mounting
brackets, ensuring that the (4) mounting holes on
the underside of the appliance are lined up with
the mounting holes on the brackets. Then, using
a 7/16" wrench, fasten one pair of the ¼"-20
hex bolts and ¼" split lock washers through the
underside of each stand bracket mounting hole
into the appliance and tighten securely. Once
the "bottom unit" has been installed, carefully
lift and place the "top unit" on the top horizontal
mounting brackets, ensuring that the (4)
mounting holes on the underside of the appliance
are lined up with the mounting holes on the
brackets. Then, using a 7/16" wrench, fasten one
pair of the ¼"-20 hex bolts and ¼" split lock
washers through the underside of each stand
bracket mounting hole and tighten securely. With
the SNH20 stand, level the appliance by adjusting
the feet found at the ends of each stand leg,
either up or down as needed.
MP4011-2207
Shipping Damage and Claims
AccuTemp Equipment is shipped F.O.B. which
means that when the merchandise is accepted
by the carrier it becomes the property of the
consignee.
If the merchandise is damaged or missing
accessories this is a matter between the
carrier and consignee. The carrier is assumed
to be responsible for the safe delivery of the
merchandise Negligence must be established
on the part of the shipper by the consignee.
To assure that the merchandise is received
properly the consignee should follow these
steps at a minimum to reduce a financial risk.
1. Make an immediate inspection of the
merchandise while still on the delivery
vehicle.
2. Never sign the delivery receipt or a freight
bill until a proper count and inspection of all
the merchandise is complete.
3. Note any damage to the packages on the
carrier's receipt.
4. Make certain the delivery person signs the
delivery receipt If the delivery person refuses
to sign, record the time, date and make a
note of the refusal on the delivery receipt.
5. If the delivery person refuses the consignee
to inspect the merchandise note this on the
delivery receipt and record the time and
date on the receipt.
6. Contact the carrier's office immediately
upon finding damage, and request and
inspection. Mail a written confirmation to
the carrier's office with the time, date and
person you spoke with.
7. Retain all packages and packing material for
further inspection by the carrier.
8. Promptly file a written claim with the
carrier and attach copies of all supporting
documents.
AccuTemp will continue assisting the consignee
in collecting claims which has been properly
managed and actively pursued.
AccuTemp can't file any damage claims or
assume responsibility or accept any reductions
in payment for any claims,
STEAM'N'HOLD™
7