Sharp Notevision PG-M17X Руководство по эксплуатации - Страница 15

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Проектор Sharp Notevision PG-M17X. Sharp Notevision PG-M17X 37 страниц. Digital multimedia projector
Также для Sharp Notevision PG-M17X: Руководство по эксплуатации (36 страниц), Руководство по эксплуатации (36 страниц), Руководство по эксплуатации (36 страниц), Руководство по эксплуатации (36 страниц)

Печатать страницу
Sharp Notevision PG-M17X Руководство по эксплуатации
E
nglish
Installation
Downloaded from:

Powering Off the Projector

1. Press the “Power/Standby” button to turn off the projector
lamp.
2. After pressing the “Power/Standby” button, you will see a
message “Power off the lamp?” on the on-screen display.
Press the “Power/Standby” button again to confirm. Other
wise the message will disappear after 5 seconds.
3. “Power/Standby” indicator flashes red for about 2 minutes.
The projector will automatically shut itself down.
4. Disconnect the power cord from the electrical outlet and
the projector.
When the “TEMP” indicator flashes red for about 10 seconds, you
v
will see a message “Fan Fail” on the on-screen display. After 5
seconds, the “Power/Standby” indicator flashes green for about 2
minutes and the projector will automatically shut itself down.
Please contact your local reseller or service center.
v
When the “TEMP” indicator lights solid red for about 10 seconds,
it indicates the projector has been overheated. You will see a
message “Over Temperature” on the on-screen display. After 5
seconds, the “Power/Standby” indicator flashes green for about 2
minutes and the projector will automatically shut itself down.
Please contact your local reseller or service center.
v
When the “LAMP” indicator lights solid orange and “Power/
Standby” indicator flashes green for about 2 minutes. The projec-
tor will automatically shut itself down. Please contact your local
reseller or service center.
When Power Cord is inserted, if inside temperature is high,
v
“TEMP” indicator flashes red until inside becomes cool. At
that time, “Power/Standby” button is not functional. Please
press the “Power/Standby” button after confirming “TEMP”
indicator is off.
http://www.usersmanualguide.com/
12