Cisco 7941G-GE - IP Phone VoIP Поиск и устранение неисправностей и техническое обслуживание - Страница 13

Просмотреть онлайн или скачать pdf Поиск и устранение неисправностей и техническое обслуживание для IP-телефон Cisco 7941G-GE - IP Phone VoIP. Cisco 7941G-GE - IP Phone VoIP 27 страниц. Unified communications manager 9.0 (sccp and sip)
Также для Cisco 7941G-GE - IP Phone VoIP: Руководство пользователя (4 страниц), Руководство пользователя (13 страниц), Руководство по администрированию (12 страниц), Руководство пользователя (13 страниц), Руководство пользователя (13 страниц), Руководство пользователя (6 страниц), Руководство по администрированию (16 страниц)

Печатать страницу
Cisco 7941G-GE - IP Phone VoIP Поиск и устранение неисправностей и техническое обслуживание
Troubleshooting and Maintenance
Phone Call Cannot Be Established
Problem
A user complains about not being able to make a call.
Cause
The phone does not have a DHCP IP address, is unable to register to Cisco Unified Communications Manager.
Phones with an LCD display show the message Configuring IP or Registering. Phones without an
LCD display play the reorder tone (instead of dial tone) in the handset when the user attempts to make a call.
Solution
1. Verify the following:
a. The Ethernet cable is attached.
b. The Cisco CallManager service is running on the Cisco Unified Communications Manager server.
c. Both phones are registered to the same Cisco Unified Communications Manager.
2. Audio server debug and capture logs are enabled for both phones. If needed, enable Java debug.

Troubleshooting Procedures

These procedures can be used to identify and correct problems.
Set Up Remote Phone
Cisco IP Phones that are configured for SSL VPN to ASA using the built-in client in a remote location (for
example, a home office) have a special configuration requirement.
We recommend that you provide the phone with an Alternate TFTP server setting manually. This setting
allows the phone to download the configuration and other files from TFTP. The phone in a remote location
(home office) cannot correctly provide OPTION 150 to the phone using DHCP.
The IP phone can register to the last-known Cisco Unified Communications Manager, but any configuration
updates cannot applied until you configure the manual TFTP server address.
Procedure
Step 1
On the phone, select Applications.
Step 2
Navigate to the IPv4 Settings window.
Step 3
Scroll to the Alternate TFTP option and set the field to Yes.
Step 4
In the TFTP Server 1 field, set the TFTP server address.
Step 5
Save the changes.
Phone Call Cannot Be Established
Troubleshooting and Maintenance
13