Siemens EC745RT90A Инструкции пользователя - Страница 20
Просмотреть онлайн или скачать pdf Инструкции пользователя для Варочная панель Siemens EC745RT90A. Siemens EC745RT90A 25 страниц.
Печатать страницу
When the programmed time
has elapsed
Changing the programmed
time
Cancelling the programme
Notes
Other functions
Timer button lock
Protection against excess
temperatures
The display will always show the time remaining for the
first programme to finish.
When the programmed time has elapsed, the burner
goes out, a beep sounds for 30 seconds, ‹‹
on the right of the display and on the left the dots
around.
Touch any symbol and the beep stops and the display
goes out.
TURN THE CONTROL KNOB TO THE 0 SETTING FOR
THE BURNERS THAT HAVE BEEN SWITCHED OFF BY
THE TIMER.
Touch the 0 symbol, select the burner and change the
time using the - or + symbols in the following 5 seconds.
The new time programmed will begin after a few seconds.
Touch the 0 symbol, select the burner and change the
time to ‹‹
using the - or + symbols.
Ú
The indicator disappears after a few seconds or will show
the time remaining in the following programme.
The timer function does not continue after a power failure.
It can programme a duration of up to 99 minutes.
If you want to check the programmed times, you can view
all the programmes by touching the 0 symbol.
Press and hold the 0 symbol for at least 4 seconds. A
whistle will sound and the display will show the following
message ˜–. Then the display will show the programme
information again. If any symbol is touched when this
function is being used, a whistle will sound and ˜– will
appear on the display.
To deactivate the button lock, press the 0 symbol again
for at least 4 seconds.
Your hob has a protection system for your timer's
electronics. When high temperatures are reached in the
timer electronics, the • message will be shown
alternately with the information on the programmes in
progress and the burners will stay on. If the temperature
drops to acceptable levels, the • message will disappear.
If the temperatures reach the maximum permitted limits,
the timer will switch off all the burners on the hob as a
protective measure, and the display will alternately show
the• message and the times remaining for the
programmes that were in progress and have been
stopped. The controls will be locked until the temperature
falls and reaches acceptable levels.
Wait a few minutes before using your hob again.
is shown
Ú
move
21