Ace AQUIKO APS-PE PENSTOCK Руководство по эксплуатации и техническому обслуживанию - Страница 9
Просмотреть онлайн или скачать pdf Руководство по эксплуатации и техническому обслуживанию для Испытательное оборудование Ace AQUIKO APS-PE PENSTOCK. Ace AQUIKO APS-PE PENSTOCK 10 страниц.
Печатать страницу
Drive options
Pedestal variants can be used with fixed and removable handwheels as well as battery drivers in
some cases, and all are available with locking systems on request.
For installation/configuration advice regarding the operation options, please contact an Aquatic
Control Engineering representative.
Actuators
AQUIKO Penstocks can also be used with a wide range of gearbox and actuation options, including
electric, rack and pinion and hydraulic drive systems. For more information, please contact ACE.
Cleaning and Maintenance
The APS-PE is designed to require minimal maintenance, so no greasing is required. Grease can
attract dirt and reduce the lifespan of the equipment. It is therefore initially advised to operate the
APS-PE penstock annually to fully open and closed cycle.
NB: Each application requires site specific assessment relating to frequency of maintenance
The APS-PE 100-1500 range, requires occasional visual inspection only, to check for damage,
obstruction etc. In certain environments, it may also require cleaning to prevent build up that could
cause obstruction.
Operation & Maintenance Manual
APS-PE Penstock
Left- Universal drive shaft (always supplied)- can be
used with 17mm socket, drill drive or AQUIKO
accessories. Also shows anti-pooling base plate and
locking pin facility
Below left: Optional locking cover
Below right: Handwheel with crank, with optional
locking pin facility