CABINETS TO GO Findley & Myers VDC12FH Инструкции по сборке - Страница 3
Просмотреть онлайн или скачать pdf Инструкции по сборке для Внутренняя отделка CABINETS TO GO Findley & Myers VDC12FH. CABINETS TO GO Findley & Myers VDC12FH 4 страницы. Full height base cabinet
Печатать страницу
Instructions:
►
1.
Place the face frame (A) face down on a flat soft working surface to ensure that the face is
not scratched or damaged (Figure 1).
2.
Installing the Side Panels (Figure 2): Insert right and left side panels (B) into the grooves of
the face frame (A) and align the cam lock connectors (Figure 2). Lock the cam
with a screw driver by turning the screw 180° clockwise (Figure 4).
3.
Installing the Bottom (Figure 3): Gently spread the side panels and insert the bottom (C)
into the grooves of side panels (B) until it is seated in the face frame (A). Align it and lock each cam.
4.
Installing the Back Panel and Toe Kick (Figure 5): Place the back panel (D) at rear of side
panels (B.) Align and lock each cam lock. Install the Toe Kick (F) by locking the cam lock
at both ends (Figure 5).
5.
Installing the Shelves: Insert the shelf clips (d) (Figure 6) into the adjustable shelf holes on the side
panels (B) at the desired height and slide in the shelf (E).
d
t
4
Q
y
A
Figure 1
B
B
Figure 2
C
B
B
Figure 3
D
B
F
Figure 5
B
d
Figure 6
Page 3
Figure 4