Cisco UBR7246VXR Краткое руководство по эксплуатации - Страница 10

Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Сетевое оборудование Cisco UBR7246VXR. Cisco UBR7246VXR 27 страниц. Universal broadband router
Также для Cisco UBR7246VXR: Руководство пользователя (7 страниц), Руководство по установке (28 страниц), Установка оборудования (25 страниц)

Figure 5

Installing the Rack-Mount Brackets so the Front of the Chassis Is Flush with the Rack

Rack-mount bracket

You cannot use the cable management bracket in this configuration.

Note

Figure 6

Installing the Rack-Mount Brackets so the Front of the Chassis Protrudes Out of the Rack

Rack-mount bracket

Attach the Rack-Mount Brackets to the Middle of the Chassis

To install the rack-mount brackets for an open or relay-type rack-mount configurations, complete the following steps:

Locate the threaded holes in the middle sides of the chassis.

Step 1

Align the first rack-mount bracket to the threaded holes in the right side of the chassis, as shown in Figure 7. Use either

Step 2

set of four holes to align the bracket to the threaded holes in the sides of the chassis.

Thread the four M4 x 6-mm Phillips flathead screws through the rack-mount bracket and into the side of the chassis.

Step 3

Use a number 2 Phillips screwdriver to tighten the screws.

Step 4

Repeat Step 1 through Step 3 to attach the other rack-mount bracket.

Step 5

See the "Installing the Cable-Management Brackets" section on page 11 for cable management bracket instructions.

Rack-mount bracket