Cisco ONS 15454 Установите - Страница 10

Просмотреть онлайн или скачать pdf Установите для Сервер Cisco ONS 15454. Cisco ONS 15454 32 страницы. Four-shelf and zero-shelf bay assembly
Также для Cisco ONS 15454: Руководство по установке (22 страниц), Установите (32 страниц), Распаковка и установка (42 страниц), Распаковка и установка (40 страниц)

NTP- A6 Install the Power and Ground

Connect the unit only to DC power source that complies with the safety extra-low voltage (SELV)

Warning

requirements in IEC 60950 based safety standards. Statement 1033

This product requires short-circuit (overcurrent) protection, to be provided as part of the building

Warning

installation. Install only in accordance with national and local wiring regulations. Statement 1045

A readily accessible two-poled disconnect device must be incorporated in the fixed wiring.

Warning

Statement 1022

Warning

This unit might have more than one power supply connection. All connections must be removed to

de-energize the unit. Statement 1028

Always use the supplied ESD wristband when working with a powered ONS 15454. Plug the wristband

Caution

cable into the ESD jack located on the lower-right outside edge of the shelf assembly.

Verify one of the following:

Step 1

If you have the 15454-SA-ANSI or 15454-SA-HD shelf, a 100-A fuse panel (35-A fuse per shelf

•

minimum) should be installed. If not, install one according to manufacturer's instructions.

If you have the 15454-SA-NEBS3 shelf, a standard 80-A fuse panel (20-A fuse per shelf minimum)

•

should be installed. If not, install one according to manufacturer's instructions.

Complete the

Step 2

Complete the

Step 3

Complete the

Step 4

Continue with the

Step 5

Stop. You have completed this procedure.

Cisco ONS 15454 Procedure Guide, Release 8.5.1

1-10

"DLP-A16 Connect the Office Ground to the ONS 15454" task on page

"DLP-A17 Connect Office Power to the ONS 15454 Shelf" task on page

"DLP-A18 Turn On and Verify Office Power" task on page

"NTP-A7 Install the Fan-Tray Assembly" procedure on page

Chapter 1 Install the Shelf and Backplane Cable

17-18.

17-19.

17-22.

1-11.

78-18537-01