Cisco UCS B420 M3 Указания по установке и обслуживанию - Страница 28

Просмотреть онлайн или скачать pdf Указания по установке и обслуживанию для Сервер Cisco UCS B420 M3. Cisco UCS B420 M3 38 страниц. High performance blade server
Также для Cisco UCS B420 M3: Руководство по обновлению (8 страниц)

Cisco UCS B420 M3 Указания по установке и обслуживанию
Tip
To remove a VIC, reverse the above procedure. You might find it helpful when removing the connector from the
motherboard to gently rock the board along the length of the connector until it loosens.
Figure 20: Installing a VIC mLOM Adapter
Installing an Adapter Card
All the supported mezzanine cards have a common installation process. These cards are updated frequently. Currently supported
cards and the available models for this server are listed in the specification sheets at this URL:
servers-unified-computing/ucs-b-series-blade-servers/datasheet-listing.html
If you are switching from one type of adapter card to another, before you physically perform the switch make sure that you download
the latest device drivers and load them into the server's operating system. For more information, see the firmware management chapter
of one of the Cisco UCS Manager software configuration guides.
Adapter cards can be installed in either slot 1 or slot 2; they can be of the same type or a mixed configuration.
Cisco UCS Manager will recognize adapters in these slots as "Adapter 2" and "Adapter 3," and counts the
Note
mLOM as being "Adapter 1." This does not match the markings on the motherboard.
28
http://www.cisco.com/c/en/us/products/