Cisco UCS C460 M4 Краткое руководство по эксплуатации
Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Сервер Cisco UCS C460 M4. Cisco UCS C460 M4 2 страницы. For intel xeon v3 series cpus
Также для Cisco UCS C460 M4: Руководство по обновлению (11 страниц)
Печатать страницу
Contents
Introduction
Requirements
Components Used
Background Information
Problem
Solution
Related Information
Introduction
This document describes an issue recognized with SAP HANA Scale-Out solutions with EMC VNC
storage attached which leads to an extended startup time of the Linux servers running the SAP
HANA application.
Requirements
Cisco recommends that you have a basic understanding of the preboot execution environment
(PXE) for a diskless environment and the standard Linux init boot process.
Components Used
The information in this document is based on these software and hardware versions:
SAP HANA Scale-Out solution with EMC VNX 5400 storage.
UCS C460-M4 and/or UCS B460-M4 servers
SUSE Linux Enterprise System 11.3
The information in this document was created from the devices in a specific lab environment. All of
the devices in this document started with a cleared (default) configuration following the solution
specific Cisco internal installation guidelines. If your solution is live, make sure that you
understand the potential impact of any command.
Background Information
The SAP HANA Scale-Out solutions are configured with two management servers to enable the
solution for the Preboot eXecution Environment (PXE) for diskless boot of the servers using a
network interface. The second management server exists for fault-tolerance reasons to avoid the
situation the servers cannot boot any longer in case of the first management server is not
available.
Note: Once the HANA server is up and running the management servers can be rebooted
without influencing the HANA servers.
The management server acts as DHCP and tftp server.