Cisco VG202 Руководство по настройке программного обеспечения - Страница 12

Просмотреть онлайн или скачать pdf Руководство по настройке программного обеспечения для Шлюз Cisco VG202. Cisco VG202 50 страниц. Voice gateways
Также для Cisco VG202: Руководство по установке оборудования (50 страниц), Руководство (10 страниц), Руководство по установке оборудования (48 страниц), Краткое руководство по эксплуатации (19 страниц)

Upgrading to a New Cisco IOS Release

Saving Configuration Changes

You need to enter the copy running-config startup-config command to save your configuration

changes to NVRAM, so the changes are not lost if there is a system reload or power outage. For example:

VG# copy running-config startup-config

Building configuration...

It might take a minute or two to save the configuration to NVRAM. After the configuration has been

saved, the following appears:

[OK]

VG#

Upgrading to a New Cisco IOS Release

To install or upgrade to a new Cisco IOS release, see

Configuration Fundamentals Configuration Guide, Release

To simplify network operations and management of Cisco IOS software migration, see the

Note

Successful Cisco IOS Software Migration

Cisco VG202 and Cisco VG204 Voice Gateways Deployment

Scenario

Figure 1-5

Cisco VG202 and Cisco VG204 Voice Gateways Software Configuration Guide

1-6

shows a typical deployment scenario for Cisco VG202 and Cisco VG204 voice gateways.

Analog FXS User Interfaces

Ethernet

RJ-11 cables

Chapter 1

Understanding Interface Numbering and Cisco IOS Software Basics

Maintaining System Memory

document.

VG204 voice gateway

Analog telephones

in the

12.2.

Cisco IOS

Basics of a

OL-16191-01