Epson Stylus Scan 2000 Руководство по информации о продукте - Страница 11

Просмотреть онлайн или скачать pdf Руководство по информации о продукте для Сканер Epson Stylus Scan 2000. Epson Stylus Scan 2000 13 страниц. Scanning application force quits on mac os 10.4 release of twain pro driver 2.10a;
Также для Epson Stylus Scan 2000: Руководство пользователя (7 страниц), Информационный листок о продукте (4 страниц), Быстрый старт (4 страниц), Информационный листок о продукте (4 страниц), Бюллетень поддержки продуктов (12 страниц), Технические характеристики (2 страниц), Руководство (11 страниц), Бюллетень поддержки продуктов (3 страниц), Бюллетень поддержки продуктов (14 страниц), Руководство (35 страниц), Руководство пользователя (24 страниц), Онлайн руководство (10 страниц)

Печатать страницу

Epson Stylus Scan 2000 Руководство по информации о продукте

Aligning the Print Head

If your printouts contain misaligned vertical lines, you may

need to align the print head using the Print Head Alignment

utility in your printer software. Your EPSON Stylus Scan

must be connected to a local port, not on a network, to use

this utility.

1. Make sure the printer is turned on and paper is loaded.

Caution:

Load paper that's at least 8.27 inches (210 mm) wide. This

prevents ink from spraying inside the printer and smudging your

printouts. For the best results, load EPSON ink jet paper in the

printer whenever you check the print head alignment.

2. Do one of the following:

(Windows) Click

Start

. Right-click the

Printers

icon and select

Properties

(Macintosh) Open the File menu and choose

. Then click the

Setup

3. Click the

Print Head Alignment

4. Follow the instructions on the screen to print a test page

and select the correct alignment.

Cleaning the EPSON Stylus Scan

To keep your printer working at its best, you should clean it

several times a year, following these steps:

1. Turn off the printer, unplug the power cord, and

disconnect the printer cable.

2. Remove the paper.

3. Use a soft brush to clean loose dust and dirt.

4. Use a soft, clean cloth and mild detergent to clean the outer

case and inside of the paper feeder. Be careful not to soak

the cloth—just dampen it. Keep the front and top covers

closed to prevent moisture from getting inside.

5. Open the top cover and clean the scanner glass with a soft,

dry cloth, or with a blower brush.

6. If ink leaks inside the printer, wipe it away with a damp

cloth.

, point to

, then select

Settings

EPSON Stylus Scan 2000

. Click the

tab.

Utility

Page

Utility icon.

icon on the Utility menu.

Caution:

Don't touch the gears inside the printer.

Never use alcohol or thinner for cleaning; they can damage the

printer components and case.

Don't use a hard or abrasive brush.

Don't get water on the printer components.

Don't spray lubricants or oils inside the printer.

Transporting the EPSON Stylus Scan

If you move your printer some distance, you need to prepare it

for transportation in its original box. Follow these steps:

1. Press the Ppower button to turn the printer off. Then

unplug the power cord and remove the interface cable.

2. Make sure the top cover is closed.

3. Remove all paper and then remove the paper and document

supports.

4. Make sure the output tray is lowered, then open the front

cover.

5. Secure the ink cartridge holder with tape, as shown.

6. Close the cover and raise the tray.

7. Use the original box and packing materials to repack the

printer.

8. Keep the EPSON Stylus Scan level during transport.

9/99

EPSON Stylus Scan 2000

- 11