Epson Stylus Scan 2500 Руководство по настройке - Страница 29

Просмотреть онлайн или скачать pdf Руководство по настройке для Сканер Epson Stylus Scan 2500. Epson Stylus Scan 2500 35 страниц. Epson imaging products (scanners, digital cameras, and stylus scan devices) compatibility chart for macintosh os x classic
Также для Epson Stylus Scan 2500: Руководство пользователя (7 страниц), Информационный листок о продукте (4 страниц), Технические характеристики (2 страниц), Информационный листок о продукте (4 страниц), Бюллетень поддержки продуктов (12 страниц), Информация о продукте (12 страниц), Начните здесь (4 страниц), Руководство (11 страниц), Бюллетень поддержки продуктов (3 страниц), Список деталей (9 страниц), Онлайн руководство (10 страниц), Начните здесь (4 страниц), Дополнительная информация (12 страниц)

Here are sample printouts.

Good sample

If the nozzle check page does not print satisfactorily (for example, if any segment of

the printed lines is missing), then you should clean the print head as explained below.

If the printout was satisfactory, you are ready to print your first page.

Cleaning the Print Head

Make sure that the Operate light is on and that an ink out message is not displayed

on the LCD panel.

Hold down the

The Stylus Scan starts cleaning the print head and the Operate light begins

flashing. Print head cleaning takes about one minute to complete.

Caution:

Never turn off the Stylus Scan while the Operate light is flashing.

Doing so may damage the Stylus Scan.

When the Operate light stops flashing, print a few lines from a document to

confirm that the head is clean and to reset the cleaning cycle.

If print quality hasn't improved after checking the nozzles and cleaning four or five

times, contact your dealer.

Checking the Stylus Scan

cleaning button for three seconds.

Print head needs to be cleaned

segments are missing