Epson PowerLite D6250 Руководство по установке - Страница 2

Просмотреть онлайн или скачать pdf Руководство по установке для Программное обеспечение Epson PowerLite D6250. Epson PowerLite D6250 3 страницы. Air filter and vent maintenance
Также для Epson PowerLite D6250: Руководство по быстрой настройке (4 страниц), Руководство по эксплуатации (50 страниц), Декларация о соответствии (4 страниц), Брошюра (6 страниц), Руководство по техническому обслуживанию (4 страниц), Руководство по установке (4 страниц), Руководство по установке (4 страниц)

Печатать страницу
Epson PowerLite D6250 Руководство по установке
Epson PowerLite D6150 /
D6155W / D6250
Power light
Red
Red
On
On
On
Lamp
Temperature
light
light
Off
Red
Flashing Off
red
Off
Off
Off
Off
Off
Off
INSTALLATION HANDBOOK
Filter light Status and solution
Off
Projector has overheated and turned off.
Leave it turned off to cool down for five
minutes.
• Make sure that the vents and air filter are
not clogged with dust or obstructed by
nearby objects.
• If operating the projector at high altitude,
turn on High Altitude Mode.
• If overheating continues, replace the air
filter.
• If the problem persists, unplug the projector
and contact Epson for help.
Off
Lamp has a problem.
• Check to see if the lamp is burned out,
broken, or installed incorrectly. Reseat or
replace the lamp as necessary.
• Make sure that the vents and air filter are
not clogged with dust or obstructed by
nearby objects.
• If operating the projector at high altitude,
turn on High Altitude Mode.
• If the problem persists, unplug the projector
and contact Epson for help.
Flashing
It is time to clean the air filter.
green
Flashing
Low air flow through the projector.
orange
• Make sure that the vents and air filter are
not clogged with dust or obstructed by
nearby objects.
• If low air flow continues, replace the air
filter.
• If the problem persists, unplug the projector
and contact Epson for help.
Orange
No air filter. Check to see if the air filter is
securely installed.
Lamp and Status Information
2