Ariesys AMK704 Справочное руководство пользователя - Страница 8

Просмотреть онлайн или скачать pdf Справочное руководство пользователя для Сетевое оборудование Ariesys AMK704. Ariesys AMK704 10 страниц.

Operation

You may have two methods to control this KVM switch, please refer to the descriptions below.

1. Front push buttons

The front button allows you a direct control over KVM switching operation. Simply press the button

to toggle to the other PC port (together with hub port control and/or audio/mic port, if binding is

enabled). By default, PC port switching, hub port control and audio/ mic port switching are bound

together, unless you specify the audio to be fixed a specific port.

2. Keyboard Hotkeys

A keyboard hotkey sequence consists of at least three specific keystrokes: See Quick Reference

Sheet

Hotkey sequence = [ScrLk]* + [ScrLk] * + Command key(s) *

User-definable = SCROLL LOCK, CAPS, ESC, F12 or NUM LOCK

Hotkey preceding sequence configuration: For users who want to use a preceding sequence other

than two consecutive Scroll Locks, there is also one convenient way to configure it.

(1) Hit ScrollLock + ScrollLock + H, then two beeps will signal readiness for new preceding

sequence selection [or Press and hold down the last front-panel button (Button 2 or Button 4)

until you hear two beeps, then release the button.]

(2) Select and press the key you would like to use as your preceding sequence (SCROLL LOCK,

CAPS, ESC, F12 or NUM LOCK keys are available for selection) and you'll hear a beep for

selection confirmation. Now you can use the new preceding sequence to execute your hotkey

commands.

Note: Each keystroke within a hotkey sequence should be pressed within 2 seconds. Otherwise,

the hotkey sequence will not be validated.

８