Pioneer DEH-P5200 Руководство по установке - Страница 2
Просмотреть онлайн или скачать pdf Руководство по установке для Автомобильный приемник Pioneer DEH-P5200. Pioneer DEH-P5200 8 страниц. Other manual
Печатать страницу
Connecting the Units
7 When not connecting a rear speaker lead to a Subwoofer
Front output
IP-BUS input (Blue)
Antenna jack
This Product
Multi-CD player
IP-BUS cable
(sold separately)
Subwoofer output
or Non Fading output
Blue/white
To system control terminal of the power amp
or Auto-antenna relay control terminal
(max. 300 mA 12 V DC).
See the section "DFS Alarm
Installation".
Brown
White/yellow
Yellow
Fuse holder
To terminal always supplied
with power regardless of
ignition switch position.
Red
To electric terminal controlled by
ignition switch (12 V DC) ON/OFF.
Orange
To lighting switch terminal.
Black (ground)
To vehicle (metal) body.
With a 2 speaker system, do not connect
anything to the speaker leads that are not
connected to speakers.
Perform these connections when using a
different amp (sold separately).
Connecting cords
with RCA pin plugs
(sold separately)
Power amp
(sold separately)
System remote control
White
Gray
+
+
Front speaker
Front speaker
≠
≠
White/black
Gray/black
Left
Right
Green
Violet
+
+
Rear speaker
Rear speaker
≠
≠
Green/black
Violet/black
+
+
Front speaker
Front speaker
≠
≠
+
+
Subwoofer
Subwoofer
≠
≠
7 When using a Subwoofer without using a different amp (sold separately)
Power amp
Antenna jack
(sold separately)
This Product
Multi-CD player
IP-BUS cable
(sold separately)
Subwoofer output
See the section "DFS Alarm
Installation".
Brown
White/yellow
Yellow
To terminal always supplied
with power regardless of
ignition switch position.
Red
To electric terminal controlled by
ignition switch (12 V DC) ON/OFF.
Orange
To lighting switch terminal.
Black (ground)
To vehicle (metal) body.
Fig. 2
Front output
IP-BUS input (Blue)
Blue/white
To Auto-antenna relay control terminal
(max. 300 mA 12 V DC).
Fuse holder
Front speaker
<ENGLISH>
Left
Right
White
Gray
+
+
Front speaker
≠
≠
White/black
Gray/black
Green
Violet
+
Subwoofer
≠
Green/black
Violet/black
Do not connect anything to these speaker leads.
Note:
Change the Initial Setting of this product.
(Refer to the Operation Manual.)
Fig. 3