Xerox Wide Format 6030 Руководство по настройке - Страница 9

Просмотреть онлайн или скачать pdf Руководство по настройке для Принтер Xerox Wide Format 6030. Xerox Wide Format 6030 20 страниц. Wide format twain
Также для Xerox Wide Format 6030: Руководство пользователя (22 страниц), Информация о выпуске (7 страниц), Примечание к выпуску (23 страниц), Примечание к выпуску (8 страниц), Примечание к выпуску (8 страниц), Примечание к выпуску (9 страниц), Руководство по обучению клиентов (50 страниц), Руководство пользователя (36 страниц), Руководство пользователя (48 страниц)

Configuration & Settings Test Prints

The first task that is performed with ALL network environment setups is the printing of

Configuration and Settings test prints. You can print them using the Web Print Management Tool

or the Printer Control Panel.

1. On the Web Print Management Tool, select UTILITIES> Test Print.

2. Select Normal Test to get both a Configuration and Settings Test Print.

(510, 8825, 8830, 8850 printers only):

CONFIGURATION Test Print

While the Printer is NOT printing, at the Control Panel press the ONLINE

displayed.

Press the ENTER

Press the NEXT

Test Print.

Press the ENTER

return to UTILITIES.

Press the EXIT key twice and the display will return to PAUSED.

Press the ONLINE

SETTINGS Test Print

Repeat Steps 1-4 above.

Step 5: Select PRINTER SETTINGS Test Print.

Repeat Steps 6-8 above.

The purpose of test prints is to provide a record of current system settings for use in daily

operations, network communications setup, and restoration of desired parameters in cases of

unexpected change (such as through accidental use of the Restore Factory Default utility). Test

print sets should be saved at the following times:

When the initial install is complete and default settings are defined.

Anytime default settings are changed.

Note: For the 721 printer only, the test print is generated when the power is switched on.

The reference set of the test print pages should be stored with the machine service log.