Xerox DocuPrint 100MX Руководство пользователя - Страница 9

Просмотреть онлайн или скачать pdf Руководство пользователя для Сервер печати Xerox DocuPrint 100MX. Xerox DocuPrint 100MX 40 страниц. Freeflow print server micr user guide
Также для Xerox DocuPrint 100MX: Брошюра (4 страниц), Технические характеристики (2 страниц), Руководство по установке (2 страниц), Руководство по безопасности (38 страниц), Руководство пользователя (32 страниц)

Media for the MICR fonts

MICR User Guide

MICR Fonts CD-ROM

The PostScript, PCL, and LCDS MICR fonts are provided

on two CD-ROMs—one for 300 dpi printing and one for

600 dpi and above. The two CDs contain the same fonts

except for the following:

The 600 dpi MICR Fonts CD contains the E13B9 and

E13B PostScript 600 dpi fonts.

The 300 dpi CD contains a 300 dpi version of the

E13B PostScript font. It does not contain E13B9,

which is 600 dpi only.

Note: When loading your fonts from CD, load the fonts

from either the 600 dpi MICR Fonts CD or the 300 dpi

CD. If both versions of the 9.12 point E13B PostScript

font are present on the system at the same time,

unpredictable results can occur. For this reason, two CDs

are provided, each containing a different version of the

9.12 point E13B PostScript font.

If you have loaded your MICR fonts from the 600 dpi CD

and you want to print using the 300 dpi PostScript MICR

font, you must first delete the 600 dpi E13B.PFB font, then

reload the 300 dpi E13B.PS font from the 300 dpi CD.

If fonts were loaded from the 300 dpi CD, delete the 300

dpi E13B.PS font before loading the 600 dpi E13B.PFB

font. (Refer to "Installing PostScript and PCL fonts," later

in this chapter, for the font loading procedure.)

Media for IPDS fonts

AFP MICR fonts, supporting the IPDS datastream, are

provided at 300 dpi on various media (CD, cartridge tape,

or diskette). Follow instructions for your host system for

loading these fonts on the host.

To install the PostScript and PCL fonts, follow these

steps.

1. Log in at the Administrator level.

2. Insert the "DocuPrint MICR Fonts" CD into the CD-

ROM drive.

3. Click the Administration icon on the main DocuSP

window.

MICR fonts

2-3