Yamaha C-5000 Руководство пользователя - Страница 29

Просмотреть онлайн или скачать pdf Руководство пользователя для Усилитель Yamaha C-5000. Yamaha C-5000 44 страницы.

Selecting the input from the

EXT.IN jacks

Press the EXT. DIRECT switch. The EXT. DIRECT

indicator will light up. The INPUT selector setting will

be disabled, and the audio source input from the EXT.

IN jacks will be output at a pair of the output jacks. The

source signal input at the balanced input jacks will be

output at the balanced BAL output jacks. The source

signal input at the LINE input jacks will be output at the

LINE 1 and LINE 2 output jacks.

If you press the EXT. DIRECT switch again or rotate

the INPUT selector, the signal specified by the INPUT

selector will become the input source. The EXT. DIRECT

indicator will turn off.

Note

If EXT . DIRECT is selected, no signal will be output at the

LINE 2 OUT (recording) jacks nor at the PHONES jack .

Adjusting the

turntable input

setting

Set the PHONO selector according to the turntable

cartridge.

Options for turntable cartridge

MM-type cartridge

MC-type cartridge (about 300Ω)

MC-type cartridge (about 100Ω)

MC-type cartridge (about 30Ω)

MC-type cartridge (about 10Ω)

CAUTION

If an MM-type cartridge is used on the turntable, be sure to

set the PHONO selector to MM .

Note

Impedance labels on the PHONO selector indicate

approximate values . Listen to and check the sound with

different impedance settings to select the most appropriate

option .

NOTICE

Before you replace the cartridge, be sure to turn off the

power to this unit .