Alecto DBX-85 Руководство пользователя - Страница 5
Просмотреть онлайн или скачать pdf Руководство пользователя для Радионяня Alecto DBX-85. Alecto DBX-85 7 страниц. 1.8ghz dect baby monitor, talk back, with nightlight
Также для Alecto DBX-85: Руководство пользователя (20 страниц)
Печатать страницу
CAUTION
Use only the charger supplied with baby monitor. Incorrect
charger type can cause damage to the handset.
Input: 230 VAC 50 Hz
Output: 9 VDC 300 mA
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN
INCORRECT TYPE.
Never use non-rechargeable batteries; use
recommended type supplied with this telephone. NiMH batteries
must be disposed of in accordance with applicable waste disposal
regulations.
Power On/Off
Baby Unit
•
When the unit is off, press and hold
•
All LEDs will turn on for about 2 seconds and then turn off, except
the LED for the nightlight button.
•
LED for the nightlight button will turn on.
•
LINK LED starts to blink while unit searches for the parent unit &
becomes steadily lit when successfully links to the parent unit.
•
To power off the unit again, press and hold
is heard. LEDs will turn off.
to turn on the unit.
. The power off tone
Parent Unit
•
When the unit is off, press and hold
•
All LEDs will turn on for about 2 seconds.
•
LINK LED starts to blink while unit searches for the baby unit &
becomes lit when successfully links to the baby unit.
•
To power off the unit again, press and hold
is heard. All LEDs will turn off.
Note: The parent unit can be used on or off the charging cradle. When
on cradle, the batteries will be recharged at the same time.
However, the time it takes to charge the batteries to full will be
longer when the unit is charged and used at the same time.
When off cradle, the batteries will lose charge over the time, even
if the parent unit is turned off.
Monitoring
•
Position the baby unit accordingly. It should be placed at least 1
meter away from the baby.
•
Take the parent unit to monitor.
•
Audio picked up by the baby unit microphone is depicted on the 8
LEDs on the parent unit (5 green and 3 red). The more audio is
picked up, the more LEDs will be lit. When no audio is picked up,
all 5 LEDs will be off.
•
If the volume of the Parent Unit is turned off, an alert will be sound
when the audio picked up reach the second red led.
Note: Do not position the baby unit and the parent unit close to each
other as a high-pitched feedback noise may be generated.
Sensitivity
You can adjust the sensitivity of the Baby Unit's microphone from the
Parent Unit. For example, if your baby is a particularly quiet sleeper,
you can increase the sensitivity levels so that you are sure to hear if
baby disturbs or becomes uncomfortable.
•
Press Sensitivity Button. The Sound Sensitivity LEDs represent
current sensitivity level will steadily lit.
5
to turn on the unit.
. The power off tone