Alemite 8120-3116 Руководство по эксплуатации - Страница 3
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Инструменты Alemite 8120-3116. Alemite 8120-3116 6 страниц. Large capacity hose reel
Печатать страницу
Large Capacity Hose Reel
Figure 3 Large Capacity Hose Reel - Wiring
Figure 3 Large Capacity Hose Reel - Wiring
1. Ensure that all supply and motor electrical ratings are
compatible.
2. Wire power to the motor following applicable wiring
diagram.
3. Switch reel on to insure proper wiring procedures
were followed. Check alignment of heads, motor,
chain and sprocket while the hose reel turns.
Inlet Connection
Threaded Inlet
NOTES:
1. Install a union fitting as near as possible
to the swivel inlet, so the swivel can be eas-
ily removed for servicing. Avoid strain on
swivel at all times.
2. Threaded type swivel inlets must be con-
nected to the fluid supply by using a flexi-
ble connector. Failure to use flexible
connector with any live reel will void war-
ranty.
Alemite LLC
To order call 1-800-548-1191 or visit www.partdeal.com - [email protected]
1. Apply thread compound to the swivel (1) and
connecting hose fitting (2) threads.
2. Thread connecting hose fitting (2) into swivel (1).
Tighten securely.
Figure 4 Large Capacity Hose Reel - Supply Line
Victaulic Inlet
NOTE: Victaulic - Type swivel joint inlet
connections must be carefully aligned. Two
victaulic connections, correctly installed,
allow adequate flexibility for smooth rotation.
Figure 5 Large Capacity Hose Reel - Victaulic
Connection
1. Connect victaulic coupling onto inlet swivel fitting and
inlet supply line.
2. Adjust inlet supply line to verify flexibility exists for
proper alignment.
NOTE: Failure to use flexible connector with
any live reel will void warranty.
Connecting The Delivery Hose
CAUTION
Do not connect the output hose to the gooseneck
(1) until after the reel is installed and motor connec-
tions are complete. Fill the hose before winding on
the reel to prevent excessive pressure on the drum
when hose is filled.
3
SER 8120
Revision (9-11)