AlphaVision 16 Руководство пользователя - Страница 5
Просмотреть онлайн или скачать pdf Руководство пользователя для Панель управления AlphaVision 16. AlphaVision 16 12 страниц.
Печатать страницуArming/disarming with PIN-code.
If the control panel is armed or disarmed by the keypad, PIN-codes are used. A PIN-code is a combination of
digits. It is important to keep PIN-codes secret. A PIN-code can consist of 4, 5 or 6 digits. To determine what
can be done with a certain PIN-code, every PIN-code has a certain level. Level 1 is the lowest level and level 5
the highest. The possibilities of a PIN-code with a certain level are shown in the table below:
level 1
level 2
level 3
level 4
level 5
PIN-code linked to sections.
The control panel may be divided in sections by the engineer. For example it is possible to arm/disarm downstairs
and upstairs seperately. In commercial applications it is possible to arm/disarm offices seperately.
Arming with PIN-code with level 1
If the control panel is at rest and a level 1 code is entered, the following text appears on the display:
Section: AB......
<#> = ON
Arming and disarming level 2
If a PIN-code has level 2, after entering this code the following text appears on the display:
Section: AB......
<*>=OFF <#>=ON
Arming and disarming level 3, 4 of 5
If level 3, 4 or 5 is allocated to a PIN-code and section A is armed and section B disarmed, the following text
appears on the display after entering this code:
On:
A.......
Off:
.Bcdefgh
When key <1> is pushed, the A will go to the lower rule. If again the <1> key is pushed, the A will go to the
upper rule. At the same way, key <2> is linked to the character of section B. The arming/disarming will be
executed after entering key <#>. The arming/disarming can be interrupted by pushing the <*> key.
Arming with 2-digit code
Arming with the 2-digit code is identical to PIN-codes of level 1. After entering the 2 digits, the display shows
e.g.:
Section: AB......
<#> = ON
User manual AlphaVision 16/96 *** 21 augustus 2003 ***
can only arm the allocated sections with this code. The sections are linked, that
is when for example the sections A, B and C are allocated, these can only be
armed simultaneously. If for example section C was already armed, sections A
and B will be armed as well. Also function 20 (show open zones) can be execu-
ted.
can arm or disarm the allocated sections. The sections are linked, The sections
are linked, that is when for example the sections A, B and C are allocated,
these can only be armed or disarmed simultaneously. Also function 20 (show
open zones) can be executed.
can arm or disarm the allocated sections. Which of the allocated sections can be
choosen. Also function 20 (show open zones) can be executed.
can arm or disarm the allocated sections. Which of the allocated sections can be
choosen. Also possible to execute some functions and bypass zones.
systemmanager (main operator). Can do everything of the level 1 to 4 and also
some additional functions.
If now the <#> key will be entered, sections A and B will be armed, if
this is possible. If section A was already armed, section B will be
armed.
With a level 1 PIN code it is only possible to arm the system.
The user of this PIN-code is now able with the <*> key to disarm both
sections or to arm both sections with the <#> key.
Notice: small characters cdefgh indicate, that with this PIN-code
these sections cannot be armed or disarmed.
Page 5