Nikon D200 Руководство пользователя - Страница 11

7. Mounting the camera

Prepare yourself at ease and try to avoid stress!

Obligations when using underwater housings for cameras:

Mount zoom (or focus) control gear (if applicable). Slide the zoom gear



over the objective. Position the gear so that the gearwheel of the zoom

control gear matches the gearwheel of the zoom control inside the

housing.

Remove the protection cap from the objective (if a port is mounted).



Turn the ON/OFF switch onto position OFF (camera and housing).



Turn the AF/MF switch (optional) onto the 'M' position (camera and

housing).

Synchronize metering mode selector on camera and housing.

Turn the tripod screw completely towards the back. Gently slide the

camera onto the camera support until it reclines. The objective should

be centered in the port mounting. If the zoom control gear does not func-

tion properly slightly turn it until the teeth fit. Never use force while

mounting the camera. Be sure the flash connection is free and not

jammed.

Next, fix the tripod screw handfirm. Check whether the camera is



mounted in a stable way without tension.

Slide the flash adapter onto the flash connection of the camera (red



connector facing back of camera).

Turn on the camera.

Check whether all control switches can be operated and function over



the complete range. If not, this has to be checked and fixed before

continuing.

Set the parameters of the camera as much as possible according to the



settings which will be used under water.

If applicable, connect the external flash and test the camera and flash.



If function fails, check the connections for their position and clean

them.

Closing of the housing:

Check the main o-ring and the opposite sealing surface for dirt. If



Hugyfot Housing for

Nikon D200

User manual