Nikon SB-600 Руководство - Страница 3

Просмотреть онлайн или скачать pdf Руководство для Вспышка камеры Nikon SB-600. Nikon SB-600 8 страниц.

Setting the

Set the SB-700 to the Master mode by using the

Off/On/Remote/Master wireless setting switch.

1. Turn the Off/On/Remote/Master switch while

holding down the button in the center.

2. Align the index of the Off/On/Remote/Master

setting switch to MASTER.

Setting the ﬂash mode, ﬂash output level compensation values, and channel

number on the Master ﬂash unit.

[Setting i-TTL mode and channel 1 (example)]

1. Set the mode selector to [TTL].

2. Press the [SEL] button to select the Master (M) ﬂash unit

choose a ﬂash compensation value with the selector dial,

and then press the [OK] button.

Rotating the Selector Dial allows for ﬂash compensation settings

from +3 EV to -3 EV or --- (No light output (although in M - - - a pre-ﬂash will occur)

3. Press the [SEL] button until the Remote Group A or

Remote Group B ﬂash unit is highlighted, then choose

a ﬂash compensation value with the selector dial,

and then press the [OK] button.

4. After setting the output compensation value of the master

and Remote Groups, press [SEL] to highlight the "Ch"

and set the Channel that you would like to use by

rotating the Selector Dial (Channels 1-4) and then press the [OK] button

SEE WHAT JUST

ONE SPEEDLIGHT

CAN DO.

Position one Speedlight

off camera for ﬂattering

ﬁll-ﬂash portraits.

For more information on setting your wireless Speedlights please see your instruction manual.

SB-700

as a Master Speedlight Unit