Abbott IonicRF RF-POLE Руководство по эксплуатации - Страница 10

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Стойки и подставки Abbott IonicRF RF-POLE. Abbott IonicRF RF-POLE 20 страниц. Generator pole mount

Печатать страницу

1. Cleaning Guidelines

Figure 4. Tightening the cap-head screws

Using the screwdriver included in the kit, tighten the cap-head

screws, alternating between the two, until the pole mount

clamp base is firmly attached to the clamp cap.

WARNING: Ensure the pole mount is securely fastened to

the pole before attaching the generator. Failing to secure

the pole mount may cause the product to fall, resulting in

product damage or injury.

Step 2: Remove the Countertop Stand

NOTE: The IonicRF™ Generator is supplied with an attached

countertop stand. Before attaching the pole mount to the

generator, the countertop stand must be removed. Always

place the generator on a level surface when adding or

removing the countertop stand.

1. Top of pole mount

clamp placed

1.2 cm to 5.1 cm

(0.5 in to 2 in)

below the bottom

edge of the black

pole cap