Akiyama CDX-MP200S Руководство по эксплуатации - Страница 8
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для CD-плеер Akiyama CDX-MP200S. Akiyama CDX-MP200S 16 страниц. Professional cd player
Печатать страницуOPERATIONS
13. Time Display
During normal play, each time you press TIME button, the display
changes as following information.
14. Pitch Bending
The speed increases or decreases respectively while the PITCH
BEND+ or PITCH BEND- button is pressed. The extent to which the
speed change is proportionate to the amount of time the button is
pressed. For example, if the PITCH BEND+ button is held in
continuously, the speed increases continuously.
The pitch changes within the range of +/- pitch select.
The jog wheel will temporarily bend the pitch of the music if the song
is already playing by rotating the wheel clockwise to speed up or
counterclockwise to slowdown. The speed that you rotate the JOG
Wheel determines the percent of pitch bend.
15. Memory Cueing (setting a cue point)
Press the MEMORY button to make the unit enter cue memory mode
(LED on), then press the desired BANK button at the desired cue point
to memorize. A new cue point will be set. The numeral on the display
will flash twice then lit steadily to indicate the cue memory has been
set.
Press the MEMORY BUTTON to make the unit
16. Recall Cue point
enter cue recall mode (LED off) and make the DRIECT ACCESS
LED off, then press the desired BANK button to recall the desired cue
memory point, during playback or pause mode accessing a stored cue
point will cue to that point and instantly start without any music
interruption. The last cue that was stored or recalled will flash in the
LCD screen to let you know it was last cued
17. MEMORY BACKUP
This will automatically keep your last setting (SGL, CTN) even if you
unplugAC current.
18.Fader Start Playback
Both player's CONTROL jack are connected to Mixer's CROSS
FADER signal output CH1 or CH2; when the jack are connected, the
operation for both player as following:
Left player will return to standby mode at CUE point automatically
when move CROSS FADER from left to right to start playback on
right player.
Right player will return to standby mode at CUE point automatically
when move CROSS FADER from right to left to start playback on left
player.
19. Relay Play using two players
How to set the Relay function:
When the both player's CONTROL jack are connected to each
h
other, the relay-play FX can be produced. The relay play is
explained as below.
Set both players to single play mode (the SINGLE indicators will lit
h
in the displays).
Begin playback on the first player.
h
When the currently playing track ends, playback will begin
h
automatically on the standby player.
The first player will enter standby mode at the beginning of the next
h
track on its disc.
By repeating this operation, the two players can be used to perform
h
continuous relay play.
By loading new discs on the standby player, you can construct a
h
continuous program of whatever tracks you wish.
By setting a cue point on the standby player, you can perform relay
h
to any desired cue point on the selected track.
NOTE:
h
Relay play may not work properly if the audio out jacks on the two
h
players are not connected to the same audio amplifier.
6
20. STUTTER EFFECT
It can create a sound similar to a CD skipping. The STUTTER Effect
can be created in 2 ways.
(1) By rapidly pressing the CUE BUTTON
A. Press PLAY/PAUSE BUTTON so that music is playing.
PLAY/PAUSE LED will light (figure 8).
CUE
Fig.8
B. Next, rapidly press the CUE button in sync with the music (figure
9).
(2) By rapidly pressing the BANK1 or BANK2 or BANK3 or BANK4
BUTTONS.
21. Scratch effect
To switch scratch on/off when each press the TIME button down for 1
sec. LCD will show "EFFECT" when scratch is on.
22. Sleep mode
The CD player automatically shuts off the transport and laser after 15
minutes (when in pause or cue mode). This will lengthen the life of
your motor drive and laser. To restart player, just press cue or play
buttons.
SPECIFICATIONS
Power Supply:
Consumption:
Dimensions:
Weigth:
AC 230 V, 50Hz
14,5W
348(W) x 106(H) x 246(D) mm
3,06 Kgs