Altronics S 9407 Руководство по эксплуатации - Страница 5
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Система внутренней связи Altronics S 9407. Altronics S 9407 16 страниц. Video door intercom
Печатать страницуFigure 3. Base Station Installation
Figure 4. Camera Installation
Installation
1. Determine the mounting locations for both outdoor camera and base station using the diagrams above. To ensure
people are within view when the camera is mounted, bear in mind the camera's viewing angle. The typical wall
mounting height is 1450mm. Ensure you are satisfied with the viewing position of the camera and base station
before drilling any holes in your wall.
2. At the selected base station mounting location, attach the mounting bracket to the wall securely using the template
and hardware provided. In the centre of the bracket, drill a hole for the electrical and camera signal wiring.
3. Connect the wiring between the base station and camera as per diagrams.
4. Slide the base station against the mounting bracket until the hooks on the bracket secure the unit in place.
5. Switch on AC power to the unit.
6. Insert SD Card or USB Memory Stick (use P1891 and P1932) into appropriate slot. Without either of these storage
media connected, the device cannot function. i.e. store and retrieve photos.
Important mounting guidelines: Do not install the monitor and camera units where they will be exposed to dirt, mois-
ture, excessive humidity, temperature (+40°C) or constant direct sunlight. Do not select a location where it will be
exposed to vibration. Select a location close to an AC power outlet where it is easy to view the screen and operate the
monitor.
VIDEO DOOR INTERCOM SYSTEM
Page 5