3M S15I - Digital Projector SVGA LCD Руководство по безопасности продукции - Страница 6

Просмотреть онлайн или скачать pdf Руководство по безопасности продукции для Проектор 3M S15I - Digital Projector SVGA LCD. 3M S15I - Digital Projector SVGA LCD 15 страниц. Multimedia projector
Также для 3M S15I - Digital Projector SVGA LCD: Брошюра и технические характеристики (4 страниц), Технические характеристики (2 страниц), Краткое руководство по эксплуатации (4 страниц)

•

To reduce the risk associated with choking:

Keep the battery and battery holder away from children and pets.

•

To reduce the risk associated with exposure to hazardous voltage:

Disconnect power cord when the projector is not in use, during lamp

replacement, and while cleaning.

instructions.

Do not store or operate this projector in wet environments.

Do not modify this projector.

Do not attempt to service the projector - there are no user serviceable parts,

other than the lamp cartridge, inside the projector. Contact a 3M authorized

service provider for service.

Do not allow water or other liquids to enter the projector.

•

To reduce the risk associated with environmental contamination due to mercury:

Dispose of lamp cartridge in accordance with applicable federal, state and local

regulations.

Replace power cord if damaged.

Contact a 3M authorized service provider if the projector becomes damaged.

Use a grounded extension cord with a rating at least equal to that of the projector.

Connect this projector to a grounded outlet.

•

To reduce the risk associated with hazardous voltage, impact, tripping, and

intense visible light:

Do not use this projector around unsupervised children.

•

To reduce the risk associated with hot surface of lamp cartridge:

Unplug the projector from the electrical outlet and allow the lamp to cool for 45

minutes before replacing the lamp.

•

To reduce the risk associated with a ruptured lamp:

Always handle the fragile lamp module with care.

Remove the projector from the ceiling or wall mount before replacing the lamp.

Use care when replacing the lamp module in the event of a lamp rupture - small

glass particles and small amounts of mercury may be present.

Ventilate the area where the lamp rupture occurred.

Wear safety goggles and gloves when cleaning up ruptured lamp debris.

Carefully collect the ruptured lamp debris in a closed container and dispose of

the container and the expired lamp module in accordance with federal, state,

and local regulations.

Wash your hands thoroughly after handling ruptured lamp debris.

Replace the lamp module when the lamp replacement message appears.

Never replace the lamp module with a previously used lamp module.

WARNING

3M™ Multimedia Projector S15i Product Safety Guide