3M 7023 Инструкции пользователя - Страница 2

Просмотреть онлайн или скачать pdf Инструкции пользователя для Респираторный продукт 3M 7023. 3M 7023 5 страниц. Particulate respirator n95

This respirator helps protect against certain particles. Misuse may result in sickness or

death. For proper use, see supervisor, or User Instructions, or call 3M in U.S.A.,

1-800-247-3941. In Canada, call Technical Service at 1-800-267-4414.

IMPORTANT

Before use, wearer must read and understand these User Instructions. Keep these instructions for reference.

Use For

Particles such as those from grinding, sanding, sweeping, sawing, bagging, or processing minerals, coal, iron

ore, flour, metal, wood, pollen, and certain other substances. Liquid or non-oil based particles from sprays

that do not also emit oil aerosols or vapors. For additional information on 3M use recommendations for this

class of respirator please consult the 3M Respirator Selection Guide found on the 3M OH&ESD web site at

www.3M.com/occsafety or call 1-800-243-4630 in U.S.A. In Canada call 1 800 267-4414.

Do Not Use For

Gases and vapors, oil aerosols, asbestos, arsenic, cadmium, lead, 4,4'-methylene dianiline (MDA) or

sandblasting; concentrations that exceed 10 times the PEL/OEL, specific OSHA standards, or applicable

government regulations, whichever is lower. This respirator does not supply oxygen.

Biological Particles

This respirator can help reduce inhalation exposures to certain airborne biological particles (e.g. mold,

Bacillus anthracis, Mycobacterium tuberculosis, etc.) but cannot eliminate the risk of contracting infection,

illness or disease. OSHA and other government agencies have not established safe exposure limits for these

contaminants.

1. Failure to follow all instructions and limitations on the use of this respirator and/or failure to wear this

respirator during all times of exposure can reduce respirator effectiveness and may result in sickness or

death.

2. Before occupational use of this respirator, a written respiratory protection program must be implemented

meeting all the requirements of OSHA 29 CFR 1910.134 such as training, fit testing, medical evaluation,

and applicable OSHA substance specific standards. In Canada, CSA standard Z94.4 requirements must

be met and/or requirements of the applicable jurisdiction, as appropriate.

3. The particles which can be dangerous to your health include those so small that you cannot see them.

4. Leave the contaminated area immediately and contact supervisor if dizziness, irritation, or other distress

occurs.

5. Store the respirator away from contaminated areas when not in use.

6. Inspect respirator before each use to ensure that it is in good operating condition. Examine all the

respirator parts for signs of damage including the two headbands, staples, noseclip, and nosefoam. The

respirator should be disposed of immediately upon observation of damaged or missing parts. Filtering

facepieces are to be inspected prior to each use to assure there are no holes in the breathing zone other