ASL INTERCOM WS-400 Kullanıcı Kılavuzu - Sayfa 5

İnterkom sistemi ASL INTERCOM WS-400 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. ASL INTERCOM WS-400 9 sayfaları. Base station for wireless intercom with four tx/rx modules

Sayfayı Yazdır
ASL INTERCOM WS-400 Kullanıcı Kılavuzu
7.0

AUTOMATIC AUDIO ROUTING

To a TX/RX module in the WS 400 one can assign either a WS-19 single channel beltpack or a WS-29 dual channel
beltpack. The on-board micro processor automatically detects either beltpack type and routes the audio as follows:
Section of WS-400 front panel
Section of WS-400 rear panel
o
When a WS-19 beltpack is assigned to the
TX/RX-1 module, the front panel top LED
(labeled "1-ch beltpack") is lit. The audio to/from
this beltpack is routed from/to the rear panel
XLR-3 connectors "Channel A".
o
When a WS-19 beltpack is assigned to the
TX/RX-2 module, the front panel top LED
(labeled "1-ch beltpack") is lit. The audio to/from
this beltpack is routed from/to the rear panel
XLR-3 connectors "Channel B".
o
When a WS-19 beltpack is assigned to the
TX/RX-3 module, the front panel top LED
(labeled "1-ch beltpack") is lit. The audio to/from
this beltpack is routed from/to the rear panel
XLR-3 connectors "Channel C".
o
When a WS-19 beltpack is assigned to the
TX/RX-4 module, the front panel top LED
(labeled "1-ch beltpack") is lit. The audio to/from
this beltpack is routed from/to the rear panel
XLR-3 connectors "Channel D".
User Manual WS-400 / February 2011 © ASL Intercom BV .
When a WS-29 beltpack is assigned to the
TX/RX-1 or the TX/RX-2 module, the front
panel middle LED (labeled "2-ch beltpack") is lit.
The audio from/to channel A of this beltpack is
routed to/from the rear panel XLR-3 connectors
"Channel A" and the audio from/to channel B of
this beltpack is routed to/from the rear panel
XLR-3 connectors "Channel B".
o
When a WS-29 beltpack is assigned to the
TX/RX-3 or the TX/RX-4 module, the front
panel middle LED (labeled "2-ch beltpack") is lit.
The audio from/to channel A of this beltpack is
routed to/from the rear panel XLR-3 connectors
"Channel C" and the audio from/to channel B of
this beltpack is routed to/from the rear panel
XLR-3 connectors "Channel D".
PAGE 5