ASL INTERCOM TS 10 Kullanıcı Kılavuzu - Sayfa 6

Kontrolör ASL INTERCOM TS 10 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. ASL INTERCOM TS 10 7 sayfaları. Cue light system

Sayfayı Yazdır
9.0
TS-120 INTERNAL CONTROLS
On the far left of the bottom PCB are a number of
small slide switches:
Slide Switch № 7
By moving this slide from the OFF to the ON
position, one puts the TS-120 into "demonstration
mode". All its functions may be demonstrated
without necessarily having any TS-10 connected.
10.0 TS-120 TECHNICAL SPECIFICATIONS
Dimensions & Weight:
Width:
480 mm
Height:
88 mm
Depth:
126 mm
weight :
1200 grams
ASL reserves the right to alter specifications
without prior notice
11.0 THE TS-99 PRESET CONTROL
1
PROGRAM button
To put the unit into program mode
2
STORE button
To store a preset
3
DISPLAY
Showing the preset number
4
SELECT PRESET buttons
To select a preset number out of the max. 99
numbers.
5
PRESET VIEW button
To show the selected preset on the TS-120
6
ATTENTION button
To send an "attention" signal from all linked TS-
120‟s to all in the preset stored channels
7
GO button
To send an "go" signal from all linked TS-120‟s to
all channels stored in the preset
The TS-99 connects to the TS-120 via a cable of 1.5m which is fixed to the TS-99. One may lengthen this
cable to max. 10 m. The TS-99 is powered by the TS-120 via this cable (5V DC).
PAGE 6
User Manual TS 120 / March 2011 © ASL Intercom BV
.
Slide Switch № 8
By moving this slide from the ON to the OFF
position, the TS -120 is programmed in such a
way that when pushing the CLEAR button all
LED‟s extinguish, so the ones of the channels
which are in "go mode" and the ones of the
channels which are in "attention mode" .
Mains voltage: 100 - 240 V AC, 50/60 Hz.
Power Consumption: max. 60 Watts
Power to TS-10‟s: 30V DC
Pin configuration Sub-D9 connectors :
Pin 4: RS 485 positive signal
Pin 5: +5V DC to TS-99
Pin 7: GND
Pin 8: RS 485 negative signal