AMCOL 6000P Operatör El Kitabı - Sayfa 10
Yağlama sistemleri AMCOL 6000P için çevrimiçi göz atın veya pdf Operatör El Kitabı indirin. AMCOL 6000P 19 sayfaları. Pneumatically controlled precision lubrication system
Sayfayı YazdırNo or Low Dispersing Air
Manifolded dispersing air pressure set too low: adjust.
•
Air hose is kinked or cut: repair or replace.
•
Spray tip is clogged: clean or replace.
•
Spray tip is damaged: replace.
•
Air in Liquid Line
Fluid line is not properly attached to pump: replace hose or fitting.
•
Injector seal is failing: rebuild or replace.
•
Liquid Drains from Spray Tip
Injector check valve is failing: rebuild or replace.
•
Liquid line in single point nozzle assembly is damaged or disconnected: replace
•
8 T60A Posi-pump Troubleshooting
No Liquid
Pump is turned off: turn liquid adjustment screw counterclockwise.
•
Pump is seized: remove, clean, and rebuild.
•
Reservoir is empty: fill.
•
Air pressure is too low: adjust to over 60 PSI.
•
Bubbles from Injectors
Air seals are leaking: replace.
•
Exit fitting is leaking: replace.
•
Liquid Drains from Injector Outlet
Exit fitting is leaking: replace.
•
Evacuation valve is ineffective: clean or replace.
•
Biaxial hose is trimmed incorrectly: be sure hose is cut straight with no burrs or
•
deformities.
6000P PNEUMATICALLY CONTROLLED PRECISION LUBRICATION SYSTEM
Operator's Manual
P A G E | 9