Acre Aperio AH40 Manuel - Sayfa 15

Anahtar Acre Aperio AH40 için çevrimiçi göz atın veya pdf Manuel indirin. Acre Aperio AH40 19 sayfaları. Wireless hub

Aperio Integration

4. Right-Click on the Hub, Select Lock/Sensor>Configure to enter the lock or sensor configuration

window. Once in the Window, the lock will need to be Set to Customer Mode in Similar fashion as the Hub

as shown below.

5. Verify that the Lock or Sensor is on the Same Channels as the Hub has been configured to

communicate on. In this example, the channels are 11, 18, and 25. This allows for the segmenting of the

network communications within the Hub's wireless network.

If performed correctly, the Hub status light will be Solid Green. If there is an error communicating between

the Hub and the Lock or Sensor, the Hub status light will begin to blink the Red LED Three Times. Next we

will import added Locks and Sensors into DNA.

Integration Guide

Page 12