Aero-motive 1301730074 Servis Kılavuzu - Sayfa 2

Endüstriyel Ekipmanlar Aero-motive 1301730074 için çevrimiçi göz atın veya pdf Servis Kılavuzu indirin. Aero-motive 1301730074 4 sayfaları. Retractors

Sayfayı Yazdır

SECONDARY SUPPORT

CAUTION:

READ INSTRUCTIONS BEFORE USE To avoid injury: all operators should be instructed in

the safe, proper use and maintenance of this product.

CAUTION:

To avoid injury, always install secondary support [Safety Cable].

CAUTION:

Do not install secondary support [Safety Cable] to same structure that supports the

retractor.

 Secondary Support [Safety Cable with Adjustable Wire Clips]

available from manufacturer as an accessory.

 Please follow all instructions provided in the Safety Cable Assembly

Leaflet [S65-SSPBR] to properly attach the Safety Cable to the

Unit. Leaflet [S65-SSPBR] is included with the Safety Cable.

 Attach other end of the secondary support [Safety Cable] to

secondary support structure by means of Carabineer Hook and lock

in place the carabineer nut – [See FIG. 03].

 Secondary support [Safety Cable] should be as short as possible but

still allowing Unit Rotation without engaging or adding any load on

the Safety Cable. The maximum length for the Safety Cable should

allow the retractor to drop no more than 6" to 10" or 152mm to

254mm, if main support would fail.

OPERATION

TOOL ATTACHMENT

READ INSTRUCTIONS BEFORE USE To avoid injury: all operators should be instructed in

CAUTION:

the safe, proper use and maintenance of this product.



Always measure weight of total LOAD tool complete with hoses,

cables and fittings] to make sure it is within Weight Capacity of

Retractor printed on unit label.



Lift LOAD [See - FIG. 04] to retractor and attach it to provided tool

clip, making sure the spring-loaded latch of tool clip is closed.

 Extension cables are available for lowering the position of the tool

without reducing active travel.

CABLE STOP ADJUSTMENT

 Adjusting cable stop is not recommended due to reduction in

active travel distance - [See - FIG. 05].

 Detailed procedure on how to adjust the cable stop can be

obtained by contacting [email protected]

 If additional cable extension is required, extension cable

assemblies are offered as accessory items.

 Special overhang cables with specific lengths & configurations

are offered. Contact [email protected]

SM1110-05

Page 2 of 4

FIG. 03

FIG. 04

FIG. 05

REV - B