Aktobis WDH-898MD Kullanım Kılavuzu - Sayfa 4

Nem Alıcı Aktobis WDH-898MD için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Aktobis WDH-898MD 8 sayfaları. Mini dehumidifier
Ayrıca Aktobis WDH-898MD için: Kullanım Kılavuzu (4 sayfalar)

Sayfayı Yazdır
Aktobis WDH-898MD Kullanım Kılavuzu
(1)
On/Off switch
(2)
Operating light (green)
(3)
Condensation tank full Light (yellow)
(4)
Air intake
(5)
Condensation tank
(6)
Fan / Air outlet
(7)
Carrying handle
(8)
Mains connection
(9)
Rubber feet
(10)
Power supply unit
(11)
Power connector for unit
(12)
Mains plug for socket
(13)
Condensation water spout plug
(14)
Float
(15)
Button (arrow up) to increase the target humidity value
(16)
Button (arrow down) for lowering the target humidity value
(17)
Humidity display, in flashing mode the selected target humidity
value is displayed for approx. 10 seconds
The intelligent mini dehumidifier WDH-898MD uses a Peltier condensation technology
(compressor-free Peltier principle without refrigerant). This technology has the great
advantage of making the device small, quiet and light. Thus, this mini dehumidifier can also
be used well in very small rooms, chambers and cupboards etc. !
1.
Commissioning
1.1. Connect the power supply unit included in the scope of delivery properly to the
dehumidifier. Make sure that the cable is completely unfolded. Then insert the mains
plug properly into the socket.
1.2. Switch on the unit using the rear on/off switch. (see illustration on
the right).
1.3. Check that the condensation tank is properly seated in the
dehumidifier. (When using the dehumidifier for the first time, the "condensation tank
full" light may come on. Simply pull the condensation tank out briefly and then push it
right back in and you are ready to go).
Functional description:
Instructions for use:
Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany
www.AKTOBIS.de