Ameristar MONTAGE Plus Classic Manuel - Sayfa 4

Eskrim & Kapılar Ameristar MONTAGE Plus Classic için çevrimiçi göz atın veya pdf Manuel indirin. Ameristar MONTAGE Plus Classic 4 sayfaları. Ornamental steel fence

Sayfayı Yazdır

Mount panels as shown in Fig. 3-4b. Unless the tops

of the posts are level, always begin with the higher

post first. Insert rail ends into brackets, hand-tighten

hex nuts onto carriage bolts, and fine-tune to ensure

panel is positioned at proper height.

Bottom-most part of panel should be 2" higher than

the ground level mark on the post. Using a wrench,

tighten hex nuts to hold rails rigidly in place. Fix brack-

ets in place with hex-headed self-drilling screws. On

the opposite end of the panel, position the rails so that

the bottom-most part of the panel is 2" above ground.

Note: Whenever the second post is lower than the

first, it will be necessary to 'rake' the panel by pushing

the unfastened end downward until it is positioned at

the appropriate height.

Attach and tighten the brackets on the second post to

complete panel installation.

Push Down On

Lower End To

'Rake' Panel